软性机器人电缆ANRBT900D,超软性,720度抗扭曲设计方案用以智能机器人系统软件,全自动装卸搬运机器设备而且用以无独特挪动的机械设备设备。其能够 用以房间内和户外。独特的电缆线结构和高品质零部件使该电缆线可以在较长使用期内做到高弯曲半径和扭曲周期时间规定。其可用以有腐蚀性矿物质机油漏水的地区及其必须电缆线承担高机械设备地应力的场所。PUR 外护线套回弹性和抗磨损。
application
ANRBT900D, super flexible, 720 degree anti torsion design for robot system, automatic loading and unloading equipment, and for special machinery without special movement. It can be used for indoor and outdoor. Special cable structure and high quality components enable the cable to achieve high bending radius and torsional cycle requirements during a long service life. It can be used in areas where corrosive mineral oil is leaking and where cables need to withstand high mechanical stress. PUR outer sheath is resistant to tear and wear resistance
极细裸铜线多芯精绞T2无氧紫铜丝,TPE铜芯电缆绝缘层,铜芯电缆色调依照
DIN 47100规范。
铜芯电缆超过0,5 mm² 为黑色带持续乳白色数字编号。3芯及之上包括绿黄接地保护输电线。铜芯电缆绞生成束而且铺设成阶级,独特铜芯电缆包囊在各层外。PUR外护线套,抗紫外光,不粘连,阻燃性 和 自 熄 (符 合 DIN EN 60332-1-2 VDE 0482 332-1-
2:2005-06一部分规范),抗水解反应和微生物菌种。常见外护线套色调为灰黑色、深灰色、橘色、翠绿色
construction
The superfine bare copper wire is stranded with oxygen free copper wire, TPE core insulation, and core line color according to DIN 47100 standard. The core line is larger than 0,5 mm, and is black with a continuous white digit number. The 3 core and above contain green and yellow protected grounding wire. The core wires are twisted into bundles and laid into a class. Special core wires are wrapped outside each layer. PUR outer sheath, UV resistant, non adhesive, flame retardant and self
额定电流/ rated voltage:
DIN VDE/IEC:
超过/ up to 0,34mm² 300 V
低于/from 0,50毫米² 300/500V UL/CSA:
低于/up to 0,34mm² 300 V低于/up to 1,5毫米² 600 V低于/up to 2,5毫米² 1.000 V检测工作电压/ test voltage:
低于/ up to 0,34mm² 1.500 V
低于/ up to 0,50毫米² 3.000 V
电导体绞线方法/ conductor stranding:极细纯铜线绞线/ bare fine copper strands,合乎/ acc. to DIN VDE 0295,
6 类规范/ class 6
绝缘层特性阻抗/ insulation resistance:
Zui少100 MOhm x km
温度范围/ temperature range:
固定不动安裝/ fixed installation:
-50° C 至/to 80° C
挪动/ exible application:
-30° C 至/to 80° C
弯曲半径/ bending radius:固定不动安裝/ fixed installation: 7,5 x d 直径-Ø / outer-Ø
移动智能终端/ exible application: 10 x d 直径-Ø / outer-Ø
扭角/ torsion angle:
较大 ± 360° /m
符合规定/ approvals:
合乎/ acc. to DIN VDE 0250, 0285 UL: 超过/ from 0,25mm²: Style 20940
CSA: AWM I A/B, II A/B FT1
机器人电缆,软性机器人电缆,ANRBT900D,工业生产机器人电缆